TS EN ISO IEC 17020 Type A Inspection Establishment.

Services

TÜRKAK 17020 Periodic Inspection


Unless otherwise stated in the standards under Labor Law No. 6331, at least once a year, the employer must periodically inspect the equipment of the employers' enterprises in the light of the assessments in the risk analysis, which are also stated by the job security experts.

It is required to be performed according to special inspection & control standards of each equipment. Supervisory staff who will perform inspection & control applications according to the technical specifications of work equipment must have specific expertise & specialization and must have a qualification that can meet all the basic criteria required by legislation & standards by taking all relevant trainings on this topic.

It is accredited by TURKAK as "Lifting and Conveying Equipment", "Type A Inspection Organization" within the framework of TS EN ISO / IEC 17020 standard, with the objective and aim to approve and institutionalize the reliability, sufficiency of all technical services as Safetbage type inspection booth.

In this scope, we provide periodical control services for Lift and Forwarding Machines: Bridged Crane, Gezer Bridged Crane, Portal Crane, Portal Bridge Crane, Mobile Crane, Caraskal, Forklift, Transpalet.

Our company is a member of LEEA and ILAMA which is accepted in the world in this context.

 

PERIODICAL INSPECTION APPLICATION FORM

TÜRKAK TA FIND US

 

 

FORKLIFT PERIODICAL INSPECTION

GThey are usually used to lift heavy loads and to lift a car or a raft. Today, the most intensive stacking tool is used. Regular checks are required for heavy loads to communicate. According to Law No. 6331 on Occupational Health and Safety; it is a legal obligation to conduct regular inspections against a possible accident risk.In the Health and Safety Conditions Regulation for the Use of Work

Equipments issued by the Ministry of Labor and Social Security, the procedures to be carried out and the standards to be used during the periodical control according to the classes of vehicles are explained. Accordingly, forklifts must be checked once a year. The standards used during these controls are;



TS 10689 , TS EN 1757-2, TS 10201 ISO 3184, TS ISO 6055, TS ISO 1074, FEM 4.004

 

TRANSPALET PERIODICAL INSPECTION

It is one of the most used among stacking vehicles. There are different types that work with human power and engine power. Designed to carry loads. If there are possible accidents that may occur during transportation, the troubles should be eliminated. Use of Work Equipment Periodic checks are mandatory at least once a year as described in the Health and Safety Conditions Directive. The standards used during these controls are;

TS 10689, TS EN 1757-2, TS 10201 ISO 3184, TS ISO 6055

 

CARASKAL PERIODICAL INSPECTION

It is a kind of machine that takes any load from its current location and carries it with a different place. These machines operate under load, creating hazardous working environments. It is necessary to pay attention to safety rules in order to work in a healthy environment in terms of work and employees. They are often used in the field of work because of their dimensional properties and ease of maintenance. Use of Work Equipment Periodic checks are mandatory at least once a year as described in the Health and Safety Conditions Directive. Caraskal examination and necessary tests are not done; it should not be forgotten that responsibility will be on the employer, not on the employees. The standards used during these controls are;

TS EN 12385-3 +A1, TS EN 13157 +A1, TS EN 818-6 +A1, TS EN 1757-2.

 

CRANE PERIODIC INSPECTION 

They are the means that must be kept under constant control due to their structure and function between lifting and transporting equipment. When the capacities and cargoes are taken into account; care, and periodic inspection of the product. According to Law No. 6331 on Occupational Health and Safety; it is a legal obligation to conduct regular inspections against a possible accident risk. The standards used during the controls are

TS 10116, TS 12385-3 +A1, TS EN 13157 +A1, TS ISO 4309, TS ISO 12480-1. 

 

Mobile Crane Periodic Control